Monday, November 27, 2017

MS Engineering: A Photo Update

The MS Engineering students just finished their penultimate project: to build a "stock" model according to instructions, and then to program it themselves to get it to work. This is a warm-up to their final project, which sees them build and program their very own robot in The Final Challenge without any instructions or other assistance.

Enjoy the photos, and feel free to browse our other articles, most of which are focused on the high school Academy. Send your comments and questions to us at rmeadth@providencesb.org.

Ryan and Mark show off their Znap, which moves around in
random directions, snapping at anything that comes too close;
apologies for poor photography!

Gideon and Kaitlyn built a challenging Elephant, which walks
and picks up items with its articulated trunk--very impressive! 

Dennis and Tully also put together a Znap, and learned a lot
about the importance of distinguishing between sensor and
motor ports!

Kassy and Liza (absent) also built an Elephant, which had an
impressively choreographed trunk routine complete with sound
effects; we also wanted to see if it could tip over one of the
puppies 

Evan and Angel built the only Robot Arm H25; it is something
similar to a factory assembly robot, picking up and releasing
objects within its reach

Jonny and Ella put together the only Stair Climber, which was
able to successfully climb the pile of books pictured 

A (mostly) successful earlier test run of the Stair Climber

Tzevon and Paul with their own Elephant and its unique slow-
motion dance routine

Audrie and Miranda consider their robot Puppy--almost as
troublesome as the real thing! 

Jeffry and Lily describing some of the challenges of just getting
their Puppy to stand and sit--who knew it would be so much work?!



Tuesday, November 21, 2017

Guest Article: STEM Without H

(The following is a student piece written by 9th Grader Joshua Frankenfield, in response to two days of discussion concerning the nature of technology, devices, and their positive and negative effects on all of us.  All students were asked to write their thoughts in the style of a blog article, and Joshua's was selected to be published on this site.  Enjoy, leave your encouraging comments, and be grateful for our deeply thoughtful students!)


STEM Without H

STEM is an acronym that many schools have begun to use to describe their academic program. STEM stands for Science, Technology, Engineering, and Mathematics. However, if these are the main four focuses in today’s education, there is a cause for concern. As a student myself, I would recommend adding in an H for humanities, because I believe that we’d be able to learn skills that may benefit us more later in life.

The main problem is that schools today are overly interested in teaching people how to use technology. Don’t get me wrong—technology can be useful in many ways—but there is a difference, according to Andy Crouch, an author and an educator, between the technology of devices and the technology of tools. The difference that he proposes is that tools make you work and become more skilled while devices do the work for you. If schools mainly teach on how to use devices, then the students would be prone to relying too heavily on devices in a manner where they end up not being able to grow in their skill sets. Schools that put an emphasis on devices aren’t putting as many challenges on the students. The students will end up using those devices to make those things easier when, in reality, we grow our heart, soul, mind, and strength if we challenge ourselves. Focusing on devices will diminish how well students are able to handle their own difficulties, whether it be academic, athletic, or social. Focusing on technology has another problem: to what ends will learning STEM go? STEM may eventually be focused on to the point where humanities is severely diminished.

Humanities has two parts to it: literature and history. Literature is important is because it has been a part of culture since the Epic of Gilgamesh. If we let literature slide into an area where it isn’t as important as it was before, then our culture won’t be as complete. This is shown in the novel Fahrenheit 451 by Ray Bradbury, where a world like this is described, and in it, people have esteemed literature as unimportant. The literature was being burned, and people were much less sophisticated because they had no basis of their culture. Plus, destroying literature made only one job (firemen that burned any place books were found), but it lost at least two jobs in the story: the librarian and the novelist. If we neglect literature, then this world would be less creative and less inspiring. Also, literature gives us an idea what the culture values and what concerns them. When we have an idea as to what cultures value, then we are able to connect more readily with other people groups. When connections between cultures occur, trading becomes easier due to less argument.

The other part of humanities is history. History, like literature, is a foundational part of culture. It helps us understand other and ourselves better. According to Providence’s high school Humanities teacher, Mr. Rottman, the reason we need to understand culture is so that we, as Christians, will be able to help people more in their time of need. If we don’t understand their history, then how can we understand the kinds of things the people are going through? We wouldn’t, and technology wouldn’t be able to help them either. Technology on its own is useless because it has no compassion or sympathy. History, therefore, builds up our skill in being able to show empathy for other people.

STEM without H is a horrible idea. I encourage all students and parents everywhere to take a closer look at their school. Does it focus solely on STEM and what it stands for or does it also add in the humanities aspect? If it mainly focuses on STEM, then what can you do to help emphasize the need for humanities? If it adds in the H, then what can you do to keep it that way?

Joshua Frankenfield is a freshman
at Providence, and a proud
member of the Providence
Engineering Academy

Saturday, November 4, 2017

Field Trip: Santa Barbara Forge + Iron

Not far from our Upper Campus is an exciting center of creativity and design. With ties to Westmont College, Providence, and our own Mr Hurt, it's the most natural place in the world to take our engineering students for inspiration...

Santa Barbara Forge + Iron!

Led by Dan and Andy Patterson, the people at Forge + Iron design, hammer, cut, and sculpt all manner of metal creations. You can see their work around town, most recently in the lighting fixtures at MOXI on Lower State Street.

Dan shows the ten students a piece of heavy machinery, designed
to cut through the thickest pieces of steel without blinking--no
touching allowed!

Over the din of hammers and ventilation fans, the students saw some fascinating works in progress. We found a good case study, too, where Dan had begun his designs in the CAD program SketchUp. While the students so far this year have been using a solid-based cloud CAD program called Onshape, they will be switching to SketchUp for the second semester. Creating the three-dimensional model up front allowed Dan to visualize the product, express his ideas to others, and spot potential challenges. Moreover, he was able to export particular decorative geometry from the design, and upload it to their plasma cutter to get just the right shape from the beginning.

The students look on as Dan moves the plasma cutter through its
three degrees of freedom

Computer models and computer-controlled cutting are then combined with the artistry and experience of the master; the team hammers and weathers the precision-cut piece to give it more character.

Students pass by as Andy gives attention to an iron archway,
destined for an existing window frame in Santa Barbara

The brothers' passion for excellence in creativity came through loud and clear. Since our own students are wrapping up their Educational Design Project, where they meet with a client and work with them to develop a satisfactory 3D-printed product, the example of what this looks like in the professional world was well timed.

May we ever be inspired! Thanks to the brothers Patterson for their warm welcome, and to Mr. Rockney for coming along as an extra chaperone.